Settings Menu - Daikin Altherma 3 H HT W Installationsanleitung

To fine-tune the weather-dependent curve: slope-offset curve
The following table describes how to fine-tune the weather-
dependent curve of a zone or tank:
You feel ...
At regular outdoor At cold outdoor
temperatures ... temperatures ...
OK Cold
OK Hot
Cold OK
Cold Cold
Cold Hot
Hot OK
Hot Cold
Hot Hot
To fine-tune the weather-dependent curve: 2-points curve
The following table describes how to fine-tune the weather-
dependent curve of a zone or tank:
You feel ...
At regular outdoor At cold outdoor
temperatures ... temperatures ...
OK Cold
OK Hot
Cold OK
Cold Cold
Cold Hot
Hot OK
Hot Cold
Hot Hot
(a) curve" [ 4 23].
See "2-points
6.4

Settings menu

You can set additional settings using the main menu screen and its
submenus. The most important settings are presented here.
6.4.1 Main zone
Thermostat type
Only applicable in external room thermostat control.
NOTICE
If an external room thermostat is used, the external room
thermostat will control the room frost protection. However,
the room frost protection is only possible if [C.2] Space
heating/cooling=On.
# Code
[2.A] [C–05] External room thermostat type for the
main zone:
▪ 1: 1 contact: The used external room
thermostat can only send a thermo
ON/OFF
separation between heating or cooling
demand.
▪ 2: 2
room thermostat can send a separate
heating/cooling
condition.
ETBH/X16DF6V+9W
Daikin Altherma 3 H HT W
4P586453-1C – 2020.10
Fine-tune with slope and
offset:
Slope Offset
↑ —
↓ —
↓ ↑
— ↑
↓ ↑
↑ ↓
↑ ↓
— ↓
Fine-tune with
setpoints:
(a) (a) (a) (a)
Y2 Y1 X1 X2
↑ — ↑ —
↓ — ↓ —
— ↑ — ↑
↑ ↑ ↑ ↑
↓ ↑ ↓ ↑
— ↓ — ↓
↑ ↓ ↑ ↓
↓ ↓ ↓ ↓
Description
condition. There is no
contacts: The used external
thermo ON/OFF
6.4.2 Additional zone
Thermostat type
Only applicable in external room thermostat control. For more info
about the functionality, see "Main
# Code
[3.A] [C–06] External room thermostat type for the
additional zone:
▪ 1: 1 contact
▪ 2: 2 contacts
6.4.3 Information
Dealer information
The installer can fill in his contact number here.
# Code
[8.3] N/A Number that users can call in case of
problems.
6 Configuration
zone" [ 4 25].
Description
Description
Installation manual
25