eta Fritola Bedienungsanleitung Seite 19

II. DEVICE DESCRIPTION (pic. 1)
A – deep fryer body
A1 – guiding grooves
B – pot
C – frying basket
C1 – handle
D – control panel
D1 – heating element
D2 – guiding edges
D3 – temperatures control
D4 – indicator light (POWER ON)
E – lid
E1 – handle
III. INSTRUCTIONS FOR USE
Before the first use, wash the parts that will be in contact with food in hot water with
detergent, rinse thoroughly with clean water
Assembling the individual parts
When assembling the fryer, follow the Fig.1,2.
– Insert the frying pot B into the body A.
– Control panel D with the heating element D1 insert into the pot B so that the guiding
edges D2 on the control panel slide into the guiding grooves A1 on the body A (an
audible click will be heard).
– Attach the handle C1 to the frying basket C by gently pushing the wires towards each
other using your fi ngers and sliding the wires into the metal holders and then insert the
bent out ends into the holder openings in the basket. Subsequently with gentle pressure
secure the holder in place in the locked position (an audible click will be heard).
Following the reverse order you may again disassemble/remove all the parts (or if
required assemble them).
Over-heating protection
The fryer is equipped with a safety heat switch which will disconnect the heating body in
case of insufficient or no amount of oil. If the over-temperature safety switch has operated,
Switch off and unplug your fryer and allow it to cool down completely. If the fryer does
not work after having been connected to the el. outlet, press
a suitable tool (e.g. a screwdriver) and plug your fryer back in.
Connect the power plug D7 to the electrical grid – the control light D4 turns on. Pour the
frying medium into the pot B. Using the control dial D3 set the desired temperature. If the
control light D5 is on, it indicates active heating. Allow the medium to full heat up (approx.
10 minutes). When the fryer reaches the right temperature, the control light D5 turns off.
The correct temperature is indicated by the indicator light D5. Slowly place the full basket
C into the pot B.
A2 – handles
D5 – indicator light (temperature)
D6 – RESET button
(150-190 °C) D7 – power cord
and wipe till dry, or let dry.
19 / 37
button D6 (RESET) with
GB