AIPTEK X5 Bedienungsanleitung Seite 8

Use only the supplied car charger to power up the device and charge the
built-in battery.
1. Connect one end of the car charger to the USB connector of the device.
vehicle. Once the vehicle engine is started, the device automatically turns on.
Once the vehicle engine is started, the device automatically turns on. If
the Automatic Record
automatically start right after the device turns on.
Once the vehicle engine shuts down, the device automatically saves the
recording and turns off the power.
Turn on the power, press .
Turn off the power, pre ss and hold
Downloaded from www.Manualslib.com manuals search engine
page
for at least 2 seconds.
5