5.6.2 Adjusting date and time settings
Your TOPITEC
®
TOUCH should be operated with accurate date and time settings.
The date and time have been factory-set. You must however manually change from standard to
energy saving time. Correct date and time settings are important for accurate logging.
Setting time
1.
1. Press the service menu button [
2. Selection menu option "Time".
3. Set the time (e.g. 08:30:30) and confirm with [OK]. To correct the entry, press [C].
4. Press [3] to return to the service menu.
Setting date
1.
1. Press the service menu button [
2. Selection menu option "Date".
DSC_0233.JPG
3. Set the date (e.g. 01/04/12) and confirm with [OK]. To correct the entry, press [C].
4. Press [3] to return to the service menu.
5. Press [
] to return to the start menu.
Fig. 5-5 Adjusting date and time settings (page 33)
DSC_0224.JPG
2.
].
2.
].
3.
3.
4.
4.
33