Restoring The Original Functions Of Your Remote Control - Philips sru 7040/10 Bedienungsanleitung

MODE
TV mode selected ............................Volume controls work with TV
DVD (VCR) mode selected........Volume controls work with TV
STB mode selected ..........................Volume controls work with TV
AMP mode selected........................Volume controls work with amplifier/ receiver
If you want a different setup, the volume control assignment can be changed.
Example: In STB mode you want to operate the amplifier/receiver volume
control
1
Press the SELECT key to select STB.
Press the key until the STB LED lights up.
2
Then keep keys 1 and 6 on the SRU 7040
pressed simultaneously for three seconds,
until the STB LED flashes twice and then
remains lit.
3
Press keys 9, 9 and 3 in that order.
4
Press the SELECT key to select AMP.
Press the key until the AMP LED lights up in
the selector window.
5
Press the OK key.
– The AMP LED flashes twice to confirm the
new setup.You can now use the AMP volume
controls in STB mode.
Restoring the original functions of your remote
control
1
Keep keys 1 and 6 on the SRU 7040
pressed simultaneously for three seconds,
until one of the LEDs (TV, DVD/VCR, STB,
AMP) lights up.
2
Press keys 9, 8 and 1, in that order.
– The LED flashes twice. All original functions
have now been restored and any extra
functions have been deleted.
VOLUME CONTROLS
Instructions for use
11