Connecting The Usb Mini Receiver - Silvercrest MTS2219-SL Bedienungsanleitung & Serviceinformationen

Wireless keyboard with wireless mouse MTS2219-SL
The wireless mouse features an automatic standby function.
When not using the wireless mouse for a certain time, it will
power off. Press any button on the wireless mouse to power it
back on.
The devices feature a battery level indicator (3 and 9). As soon as
they light-up, the batteries of the respective device are
exhausted. When this happens, replace the batteries with new
batteries of the same type.

Connecting the USB Mini Receiver

Plug the USB mini receiver into a free USB port on your powered-on
computer.
The operating system will detect the new hardware and will automatically
install the corresponding drivers. Depending on the operating system, one of
the following messages will appear:
Under Windows Vista
When connecting the receiver for the first time, the operating system will
prompt "Installing device driver software". Wait until the message "Your
devices are ready to use" appears. Your mouse and keyboard has been
successfully configured and can now be used.
®
Under Windows
When connecting the receiver for the first time, the operating system will
prompt "Found New Hardware". Wait until the message "Your new
hardware is installed and ready to use" appears before using the mouse
and keyboard.
If you still have your old keyboard and mouse connected to the computer,
please shut down your computer, disconnect the corresponding devices and
restart the computer.
In case that the connection to the USB mini receiver becomes
interrupted or if it's not possible to establish any connection,
remove the batteries from the mouse and keyboard, and re-
insert them.
Fig.: USB mini receiver
® ®
, Windows
XP
7
English
11