Cd/Mp3/Wma/Usb Operation - Xomax XM-2CD613 Anleitung

1. Insert / Eject CD
Insert a disc into CD slot with label
side up. The disc will be automatically
loaded into the unit, even when it is off
or at radio mode. The word "LOAD"
will blink on the display and the CD
will play automatically. Press the
EJECT Button to eject the disc from
the slot. If the disc is not removed
from the slot within  seconds, it will
automatically be loaded into the slot
again. When the disc is ejected and
removed, the unit will automatically
switch to radio mode.
While you are pllaying a disc with
MP3 or WMA, The first file in the
root folder will be played. As the file
is playing "MP3" or "WMA" will be
displayed first, then if there is any ID3
information that will be displayed as
the file is playing.
To play MP3/WMA files from a USB
flash memory, insert a USB flash
memory into the USB port on the left
side of the unit. The unit will start play-
ing MP3/WMA files on the USB flash
memory automatically.
If the MP3/WMA files are stored in
folders on the USB drive, the unit will
start by playing the first song in the
first folder. After playing all the files
sequentially in the first folder, the unit
will play sequentially all of the files in
the next folder. The unit will continue
playing through all of the folders on
the USB drive in this manner.
If the USB drive has loose files and
folders containing files, it will play the
loose files sequentially, then it will play
the files in the folders sequentially.
2. Multi-Session CD Reading
This unit can read multi-session CDs.
The multi-session reading will be
activated automatically if the player
detects a file that is written in multi-
session format.
3. Selecting Tracks
Press the SEEK >>| Button to advance
CD to the next track. Track numbers
will be shown on the display. Press
Downloaded from www.Manualslib.com
CD/MP3/WMA/USB/SD Operation
manuals search engine
and hold SEEK >>| to fast forward.
Press the SEEK |<< Button to go to a
previous track. Track numbers will be
shown on the display. Press and hold
the SEEK |<< Button to fast reverse.
Disc will play normally when the No.
1(play/pause) Button is pressed.
4. Play / Pause CD
Press the No.1/PAU Button to pause
the CD. Press this button again to
resume playback.
5. Scanning Tracks
Press the No./INT Button to play
the first 10 seconds of each track,
"INT" will be displayed on the display.
Press this button again to resume
playback.
6. Repeat
Press the No.3/RPT Button to repeat
the current track. Press it again to
cancel.
7. Random
Press the No./RDM Button to play all
the tracks in random order. "RDM" will
appear on the display. Press this but-
ton again to stop random play.
8. UP 10 (for MP3/WMA only)
Press the No./UP10 Button to ad-
vance 10 tracks at a time.
9. DN 10 (for MP3/WMA only)
Press the No./DN10 Button to go
back 10 tracks at a time.
10. Search Modes
There are  search modes to help find
your favorite MP3 & WMA tracks. The
search modes only works with MP3/
WMA CDs, and USB flash memory
with MP3/WMA files.
A. Simple Track Search
Press the SEEK |<< or >>| Button
to go to the next track or previous
track. Press the Number  button to
go back 10 tracks at once or press
the Number  button to advance 10
tracks at once.
Owner' Manual
1