Rds Operation - Xomax XM-2CD613 Anleitung

Radio Operation
1. AF-ALTERNATIVE FREQUENCY
Press the AF button so that the unit
will choose the strongest FM signal
for the selected station, so that you
do not have to re-tune the stations
when driving between different
transmitter coverage areas. When
AF is on, it means RDS information
is received; when AF is flashing, it
means RDS information is not yet
received.
2. TA - TRAFFIC ANOUNCEMENT
Press the TA button so that the unit
will be activated for reception of traffic
announcement from local radio sta-
tions.
To choose the TA mode, press the
sound select button for  seconds, the
display will show TA SEEK. Rotate
the encoder volume to choose be-
tween the TA SEEK and TA ALARM,
after chooisng, please leave the unit
idle for the mode to activate. In TA
SEEK mode, the unit will seek for traf-
fic announcement programme when
TA is pressed; in TA ALARM mode,
no TA/TP is displayed and the alarm
is set off.
3. PTY - PROGRAMME TYPE
This radio will allow you to select the
type of programme required, and will
search for a station broadcasting that
type of programme. Press the PTY
button once to show the music type.
Then press 1- button to choose the
different music types available.
Press the PTY button twice to show the
speech type programme. Then press
1- button to choose the different
speech type programme. Each num-
ber keye will show 3 different speech
programme for you to choose.
Owner' Manual
1
Downloaded from www.Manualslib.com manuals search engine
(Cont)
4. MASK DPI - MASK ALL
Press the sound select button for 
seconds, the display will show TA
SEEK. Press the sound select button
again so that the unit will show MASK
DPI. Rotate the encoder volume to
toggle between MASK DPI and MASK
ALL mode. Then leave the unit idle for
the mode to take effect. During MASK
DPI mode, the unit will mask only
the AF which has different PI, this is
the default mode; during MASK ALL
mode, the unit will mask the AF which
has different PI and no RDS signal
with high field strength.
5. RETUNE S/L - SHORT/LONG
This function is to set the initial dura-
tion of automatic TA Search -- Press
and hold the sound select button until
"TA SEEK" is shown on the LCD, then
press the SEL button to cycle through
the menu selections until "RETUNE_
S" is shown, use the VOL +/- button to
choose "RETUNE_S" or "RETUNE_
L". The default is "RETUNE_S".

RDS Operation

RDS-EON CONTROL
This unit is equipped with the latest
technology of EON control, so that
when you are listening to Radio or CD,
if there is any travel announcemnet
from a nearby local station, the radio
will already know the frequency of
that radio station. Then it will receive
the station, turn up the volume, or
interrupt the playback of the music
for the duration of the announcement.
At the end of the announcement the
radio will return to its previous state
ready for the next announcement.