Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Warnings Before Installation
Important Warnings to Take Note of BEFORE Com-
mencing Installation
Damage Caused By Incorrect Installation or Usage is
NOT Covered By Warranty. PLEASE Take The Time To
Read The Installation Notes Carefully.
To Validate The Warranty Please Ensure That The Unit
Is Installed By A Professional, VAT Registered Car
Audio Installation Company.
• To avoid shorts in your vehicles electrical system, be sure
to disconnect the battery cable before beginning installa-
tion.
• This unit is intended for vehicles with a 1-volt battery and
negative grounding. Before installing the unit in a recreation-
al vehicle, truck, or bus, check that the battery voltage is 1
volts.
• Remove the two transport screws from the top of the unit
before installation.
• The black lead is ground. A good chassis ground requires a
tight connection to ground. The area should be free from rust,
paint or any form of dirt. Please ground this lead separately
from the ground of high-current products such as power amps.
If you ground the products together and the ground becomes
detached, there is a risk of damage to the products or fire.
• Be sure to connect the colour coded leads according to the dia-
gram. Incorrect connections may cause the unit to malfunction
or damage the vehicle's electrical system. Cords for this prod-
uct and those for other products may be different colours even
if they have the same function. When connecting this product
to another product, refer to the supplied installation manuals of
both products and connect cords that have the same function.
• Be sure to connect the negative (-) speaker leads to the nega-
tive (-) speaker terminal. Never connect the negative (-) speak-
er leads to chassis ground.
• The unit is only designed for use with speakers. Do not
combine outputs for use with speakers. Do not ground nega-
tive speaker leads to the chassis ground.
• Speakers connected to this unit must be high-power units with
a minimum rating of W and impedance of to 8 ohms. Con-
necting speakers with output and/or impedance values other
than those noted here will result in damage to the head unit
Owner' Manual
Downloaded from
www.Manualslib.com
manuals search engine
Werbung
Inhaltsverzeichnis
