Operating The Pv Inverter; (Pv-Pns03Atl-Ger / Pv-Pns04Atl-Ger / Pv-Pns06Atl-Ger); Operating Procedure; Start (Turn On) - Mitsubishi Electric PV-PNS03ATL-GER Bedienungsanleitung

5 Operating the PV Inverter

(PV-PNS03ATL-GER / PV-PNS04ATL-GER / PV-PNS06ATL-GER)

The following illustrates the operation of the PV inverter.

5.1 Operating Procedure

The operating procedure to start or stop the PV inverter is illustrated below.

5.1.1 Start (Turn on)

1
2
3
After turning on inverter, the PV inverter automatically runs depending on
amount of sunlight.
Downloaded from www.Manualslib.com
Display panel
START
PLEASE WA I T . . .
1 2 3 4 5 kWh
(For: Preparing itself for running)
RUNN I NG
1 2 3 4 5 kWh
(For: Running with the grid connected)
manuals search engine
Procedure
When the PV inverter is inactive, press
and hold the POWER switch for 2 sec-
onds or longer.
・The PV inverter starts up, with the
"gate" displayed on the LCD starting
to open.
The LCD displays "START" for 3 sec-
onds, and then switches to the display
in STATUS mode.
Afterwards the LCD displays informa-
tion such as messages, state of power
generation, total generated energy,
etc., available in its modes of operation.
For details, refer to "5.2 Viewing
Operating Status".
59
pp.1-48
pp.1-48
pp.1-48