Installing Pv Inverter - Mitsubishi Electric PV-PNS03ATL-GER Installationshandbuch

7 Installing PV Inverter

The following illustrates the installation of the PV inverter.
<Installing the mounting plate>
●Select appropriate screws for wall material. (See p. 55 "Appendix" for
details.)
1
2
Make sure that the mounting plate is on the level.
3
Screw
(tentatively-fasten)
Mounting hole
1. Tentatively fasten one screw in the
top center hole of the mounting
plate.
● ● The screw should be perpendicular
to the wall.
2. Hang the mounting plate on the ten-
tatively-fastened screw. Adjust the
mounting plate vertically.
1. Tighten six screws in the remaining
mounting holes to fix the plate on the
wall.
2. Tighten the tentatively-fastened
screw.
40