Linea 2000 Domo B3970 Gebrauchsanleitung Seite 58

B3970
Program 7: Ultra fast II: this baking program allows you to make a 1000 gr white
loaf of bread within an hour.
Program 8: Dough: select this program if you just want the breadmaker to make
dough and let it rise.
Program 9: Jam: for the confection of delicious jam. Caution! Make sure you have
stoned all ingredients before putting them into the bread pan. Sharp pips and stones
could damage the non-stick coating of your breadmaker.
How to proceed: Put all ingredients into the bread pan and select the program "Jam".
Press start. The appliance will now preheat the ingredients. Next, the breadmaker will
mix all ingredients and let the jam cool down. When the process is fully completed,
you will hear a bleeping signal. If you wish, you can pour the jam into a jar and allow
it to cool down some more. When the jam has sufficiently cooled down, close the jar
and keep it refrigerated.
Program 10: Cake: This program allows you to make bread that is confected with
e.g. baking powder. With this type of baking program, your loaf of bread will be
less high and more solid. you can not use the time delay function with this program,
because the baking powder starts working immediately. If you use this program to
bake a cake, we recommend that you put the ingredients in the bread pan, program the
breadmaker and briefly stir the ingredients with a wooden spoon before pressing the
"start" button.
Program 11: Sandwich: select this program to make a very light white dough
suitable for e.g. little bread rolls. This program does not allow you to select the degree
of colour for your crust, as it is programmed automatically.
Program 12: Bake: for ready-made dough which you perhaps had already made
in advance. This program can only be used for the final stage of the baking process.
Program 12 also allows you to reheat bread that you had already baked.
OPERATING INSTRUCTIONS
THE ENCLOSED RECIPE BOOK IS A GENERAL GUIDELINE. IT IS VERy
WELL POSSIBLE yOU NEED TO MAKE SOME MINOR CHANGES TO THE
RECIPE TO GET THE DESIRED RESULT WITH yOUR BREADMAKER.
Step 1: Take the bread pan out of the breadmaker, by turning it a quarter of a turn to
the right. you can lift the bread pan out, straight up, by pulling the handle.
Step 2: Place the kneading paddle on the axle in the centre of the bread pan. Please
position the kneading paddle carefully and appropriately, so all ingredients can be
sufficiently mixed and kneaded.
Step 3: When putting the ingredients into the bread pan, please do so in the following
manner and order:
1. Half of the required flour.
2. Water / milk
3. Butter / oil
58