Firmware (Updating The Fi Rmware); Sysrestart (Restarting/Resetting The Router); Diagnostics (Router Self-Test); Status (Overview) - Hama 00053120 Bedienungsanleitung

Daylight Saving:
NTP Server Address:
Click -> SAVE at the bottom of the window to save your settings.
9.3 Firmware (updating the fi rmware)
From the Main Menu, select the Maintenance menu item,
and then the Firmware sub-item.
This is where you can install a new fi rmware update if
there is one available. Check our homepage www.hama.
com or Hama Product Consulting to learn about fi rmware
updates.
Once you have downloaded the new fi rmware, extract it
and save it to your desktop. Then click -> Browse, select
the extracted fi le, and click -> UPGRADE. The fi rmware is
then copied to the router, which then performs a restart.
Note:
Only upgrade the fi rmware if you are experiencing problems with the router. Otherwise, we strongly recommend against performing
an update. The update deletes any changes that you have made previously and so you will need to carry out these settings again
once the upgrade is complete. Please note that only fi rmware updates authorised and released by Hama may be loaded onto the
router; otherwise any warranty claims against Hama GmbH & Co. KG are void.

9.4 SysRestart (restarting/resetting the router)

From the Main Menu, select the Maintenance menu item,
and then the SysRestart sub-item.
Here, you can restart the router with the current settings
or reset it to the factory default settings.
If you want to restart the router with the current settings,
select Current Settings and click -> RESTART.
If you want to reset the factory default settings, select
Factory Default Settings and click -> RESTART.

9.5 Diagnostics (router self-test)

From the Main Menu, select the Maintenance menu item,
and then the Diagnostics sub-item.
You can run a diagnostics test for the ADSL2+ WLAN
Modem Router here.
Virtual Circuit: If you have retained the default
PASS
FAIL
SKIPPED

10 Status (Overview)

This overview provides detailed information about your current router settings. From the Main Menu, select the Status menu item.
38
Downloaded from www.Manualslib.com
Enable or disable daylight saving time.
Usually a public server that automatically adjusts the time and date.
settings, you must select PVC0 in this fi eld.
= Passed the test
= Error or incorrect confi guration
= Test was skipped
manuals search engine