Safety Precautions - Modster Focke Wulf FW190 Betriebsanleitung

Take the horizontal wings, accessory bag and screwdriver out of the box.
Please insert the horizontal wings to the slot on the fuselage, then assemble the
servo arm and connect the controlling steel wire.
3. Assembly of the propeller
Take the propeller, spinner and accessory bag out of the box. Assemble the
propeller into the nose holder and use the spacer & M4 nut, to lock the motor
shaft, then cover the nose and lock it to the motor shaft.
4. The assembly of the FW-190 is finished!
Adjustment steps
1. Turn on the transmitter and please make sure, that it has enough power. Push the
joystick for throttle and throttle trim to the lowest position and keep the other trim in
a neutral position.
2. Please connect the battery to the ESC. Please make sure, that this battery is fully
charged.
3. Hold the model in the air and push channel 6 on the transmitter. The landing gear
will be opened.
4. Hold the back part of the fuselage and push the throttle slowly. This is how you
check, whether the motor works or not.
5. Please check the control surface and front wheel to make sure, that the wheel can
work normally. Do not reverse it and make sure, that the control surface & back
wheel can work normally.
6. Check the center of gravity and make sure, that it is within the range as indicated
on the picture.
7. The adjustment of FW-190 is finished!

Safety precautions

1. If you have a simulator, we suggest, that you practice your skills by the simulator
before flying this model. That will be helpful for you.
2. Please let the plane climb above 50 meters altitude with half throttle, when you
fly it for your first time. Then you will be more familiar with the performance of
this plane.
3. You should learn how to control this model gently. That will reduce the possibility
of crashes and prolong the usage life of the plane.
4. The space for the turn radius should not be too small or it will increase the