interFace – BASIC SETTINGS
you can change the various basic settings in three easy steps:
1. call uP Menu
Press the On/Off button
and the plus button at
the same time and hold
for 3 seconds.
set tiMe
alloW
PassWorD change
To be able to change the
password with the
code «0004», the value
must be set to 1. Back to 0
after the change.
change PassWorD
26
Downloaded from
www.Manualslib.com
2. enter coDe
CODE1004
using the plus and minus
button, select the desired
number and confirm using
the On/Off button.
To confirm the code, press
and hold the On/Off button
for 3 seconds.
CODE0001
CODE1008
CODE0004
manuals search engine
3. select Value
sAvE
using the plus and
minus button, select
the desired value and
confirm this by pressing
and holding the On/Off
button for 3 seconds.
Save is displayed.
CODE0001
1=ON
CODE1008
2=OFF
CODE0004