Stromer ST1 Bedienungsanleitung Seite 29

7. select inForMation DisPlay
By repeatedly pressing the
you access the information displays
9. use MoVe MoDe
Before you can use the move mode, this must be enabled (see page 27).
Select the "Zero mode" (see page 23) and press and hold the plus button.
10. use Boost MoDe
Before you can use the Boost mode, this must be enabled (see page 27).
Select the Power mode and press and hold the plus button.
Downloaded from www.Manualslib.com
button,
1x
manuals search engine
8. resetting inForMation DisPlay
The information display flashes briefly
if the reset was successfully completed.
2 sec.
at same time
2 sec.
2 sec.
This push assistance
is limited to walking
speed.
The Boost can only
be used as of 1.8
mph and is limited
to 12.5 mph.
depending on the
legal regulations in
your country, this
feature may not be
available.
25