Siemens SIMATIC NET 6GK1 901-1GA00 Gebrauchsanleitung

Directions for Use of SIMATIC NET Industrial EthernetFastConnect Stripping Tool
for: 6GK1901-1FC.....
yellow
6GK1102-6A.....
HARTING Plugs (IP20/ IP65)
green
for: 6GK1901-1B.......
1. Fit the required knife cassette in the 2. Take the stripping tool in your right
stripping tool. If your stripping tool was hand.
supplied with a yellow knife cassette, 3. Measure the cable length by placing
the cutting depth must be adjusted the cable against the measuring
with the middle socket-head screw template. Use your left index finger as
after fitting the new cassette! a limit stop.
5. Tighten the stripping tool fully. 6. To strip the insulation, turn the tool in
the direction of the arrow
- approx. 4 times for PVC insulation,
- approx, 8 times for PUR insulation.
8. After releasing the tool, remove the 9. If the white filler was not removed
remnants of the cable from it. during stripping, pull this off with your
hand.
11. Pull the protective foil off the wires. 12. Follow the instructions supplied with
your connector or outlet.
For more detailed information on setting up networks, refer to the SIMATIC NET TP and FO
Network Manual
6GK1 901-1GA00
4. Fit the measured end of the cable into the
stripping tool as far as allowed by the
index finger of the left hand.
7. Keeping the stripping tool closed, pull it
off the end of the cable along with the
jacket and remnants of the shield.
10. The protective foil is easier to remove if
you score it between the wires with a
screwdriver.
13. Replace the knife cassette after approx:
- 1500 operations with cables
with PVC outer jackets;
- 150 operations with cables
with PUR outer jackets.
Order numbers for knife cassettes:
Green: 6GK1901-1GB01
Yellow: 6GK1901-1GB00
Gebrauchsanleitung für SIMATIC NET Industrial EthernetFastConnect Stripping Tool
SIMATIC NET
Produktinformation
Product Information
Gebrauchsanleitung für / Directions for Use of
SIMATIC NET Industrial Ethernet
FastConnect Stripping Tool 6GK1 901-1GA00
Nachfolgend finden Sie Informationen in deutscher Sprache.
This document contains information in English.
A5E00328644
© SIEMENS AG 2004
Änderungen vorbehalten
Subject to change
Copyright © 2004 Siemens AG
6GK1 901-1GA00
A5E00328644
Stand / Dated / 06.04