Dell W2600 Benutzerhandbuch Seite 41

Problem
No sound
Double image or no image with DVD
40
Troubleshooting Your TV
Downloaded from www.Manualslib.com manuals search engine
Possible Solution
Ensure mute is not turned on. Pressing the Mute
1
button on the remote control turns the mute function
on and off.
2
If only certain TV channels do not have sound, verify
that the proper source is selected in the Input Select
menu.(For more information, see "Input Select Menu"
on page 30).
3
Verify that the audio cables are firmly connected to
both the audio input connectors on your TV and audio
output connectors on your devices. Ensure that the
cable colors match the connectors colors.
4
Also, ensure that the audio cables are connected to
the same row as the video cables. See "About Your TV"
on page 5 for the location of the connectors.
5
Reconnect the device using the same type of
connector. For example, if you are using the composite
connector on the bottom, try connecting the device
to the composite connector on the side of the TV.
See "About Your TV" on page 5 for the location
of the connectors.
After you connect the device, change the input source
in the OSD. See "Input Select Menu" on page 30 for
more information.
6
Connect the device using a different connector.
For example, if you are experiencing the problem
using a composite connector, try using the
component connector.
NOTE:
To connect to a different connector, you need the
appropriate cables for that connector. See your device
documentation for a list of supported connections.
After you connect the device, change the input source
in the OSD. See "Input Select Menu" on page 30 for
more information.
7
Test the device on a different TV.
NOTE:
If you are using PIP/POP/PBP, ensure the proper
Audio Source is selected. Press Menu on your remote
control, and select PIP/POP/PBP.
Turn off the progressive scan on the DVD player. Your
Dell™ TV offers built-in deinterlacer that is equal to or
better quality than the deinterlacer on your DVD player.
For more information about progressive scan on your
DVD player, see the documentation for your DVD
player