Selecting Your Osd Language; Input Select Menu - Dell W2600 Benutzerhandbuch

5
6
7

Selecting Your OSD Language

1
2
3

Input Select Menu

The Input Select menu allows you to select the proper source based on how you have your TV and
video equipment connected. Press Input on the remote to go directly to the Input Select menu.
You can also press Menu and select Input Select from the main menu.
TV — Select when you have your antenna or cable connected to the ANT/Cable connector. See "Bottom
View" on page 8 for the location of the ANT/Cable connector.
30
Using the On-Screen Display
Downloaded from www.Manualslib.com
Use the up and down buttons (channel buttons) and the Enter button to adjust or
select settings.
NOTE:
You can select Exit to return to the main menu or press Menu to exit the OSD.
After you have made your selections, select the Exit.
To exit the OSD, press Menu on the remote or select Exit from the main menu.
Press Menu to enter the OSD.
Select Setup.
In the Setup menu, select Language and select the language that you want the OSD to
appear in.
I N P U T S E L E C T
E X I T
1 VG A
2 DV I
3 T V
4 AV 1 ( C O M P O S I T E 1 )
5 AV 2 ( C O M P O S I T E 2 )
6 AV 3 ( S V I D E O 1 )
7 AV 4 ( S V I D E O 2 )
8 AV 5 ( C O M P O N E N T 1 )
9 AV 6 ( C O M P O N E N T 2 )
Y S C A RT Y / C
G S C A RT R G B
R C A R D R E A D E R
S H OW I N P U T S
manuals search engine
select Active or All. Active searches for
which connectors are being used. The
available input sources appear in white
and input sources that are not available
appear in grey. All shows all the input
sources and allows you to select all the
input sources even if you do not have a
device connected.
VGA — Select when your TV is being
used as a computer monitor and you
have connected the computer using
a VGA cable. See "Bottom View" on
page 8 for the location of the VGA
connector.
DVI — Select when you have a device,
such as a set-top box, connected to the
DVI connector. See "Bottom View" on
A L L AC T I V E
page 8 for the location of the DVI
connector.
NOTE:
Show Inputs allows you to