Osd Setup; Card Reader - Dell W2600 Benutzerhandbuch

OSD Setup

OSD setup allows you to adjust the appearance of the OSD, set the channels when in TV mode,
change the language of the OSD (see "Selecting Your OSD Language" on page 30), and restore
factory settings.
If you are using the ANT/Cable connector, enter Channel Setup an select your region.
Source — The default setting is Auto. The TV automatically detects if a computer (PC) or video
device is being used. If the image does not display correctly, you can select the source, PC or Video,
depending on the device you are using.
Color — The default color space is RGB. If the colors are not displaying correctly, you can change
the setting to YUV.

Card Reader

A card reader allows you to view digital photos on your TV.
34
Using the On-Screen Display
Downloaded from www.Manualslib.com
SETUP
BACK
OSD SETTINGS
CHANNEL SETUP
LANGUAGE
FACTORY RESET
DVI SETTINGS
MAIN MENU
EXIT
IMAGE
INPUT
MGMT
SELECT
manuals search engine
Use OSD Hold Time to increase or decrease the amount
of time the OSD appears. The maximum amount of time
is 60 seconds.
In the OSD Setup menu, you can select TV Button Lock
to lock the buttons on the side panel. When this option
is enabled, only the power button functions. Hold the
volume increase and the channel increase buttons
together for 10 seconds to unlock the buttons.
If you are using the DVI connector, you may need to
verify the following settings:
PIP/POP
COLOR
PICTURE
SETTINGS PBP
SIZE SETUP