Listening To Bluetooth Enable Devices; Pairing Bluetooth Devices - Sharp HT-SB602 Bedienungsanleitung

Bluetooth one touch connection via NFC (continued)
2
A pop-up window asking whether to proceed with the Blue-
tooth connection appears on the device. Select <YES>.
z The 'connected' message appears when the connection is
complete.
3
Playback will start automatically. Otherwise, press play (on
remote control or source device).
z Sound will be heard from the speakers of this unit via au-
dio streaming.
z Your device must be within 10 meters from the sound bar.
Bluetooth operation buttons (remote control only)
Press the button to play or pause.
Listening to Bluetooth enabled devices
„ Bluetooth
Bluetooth wireless technology is a short-range radio tech-
nology that enables wireless communication between
various types of digital devices, such as mobile phone or
computer. It operates within a range of about 10 meters (30
feet) without the hassle of having to use cables to connect
these devices.
This unit supports the following:
Communication System: Bluetooth Specification version 2.1
Bluetooth + Enhanced Data Rate (EDR).
Support Profile : A2DP (Advanced Audio Distribution Profile)
and AVRCP (Audio/Video Remote Control Profile)
Notes when using unit with a mobile phone
z This unit cannot be used to talk over the telephone even
when there is a Bluetooth connection made to a mobile
phone.
z Please refer to the operating manual supplied with the
mobile phone for details on operation of your mobile
phone whilst transmitting the sound using a Bluetooth
connection.
„ Pairing Bluetooth devices
Bluetooth devices need to be initially paired first before they
can exchange data. Once paired, it is not necessary to pair
them again unless:
z Pairing is made with more than 8 devices. Pairing can
only be made one device at a time. This unit can be
paired to a maximum of 8 devices. If subsequent device
is paired, the oldest device paired, will be deleted and
replaced with the new one.
z This unit is reset. All pairing information is deleted when
unit is reset.
z Pairing information is deleted whilst re-pairing, etc.
All manuals and user guides at all-guides.com
E-15
Press the button to skip up.
Press and hold to fast forward.
Press the button to skip down.
Press and hold to fast reverse.
Notes:
z To disconnect, simply touch your device to the NFC de-
tection area on the subwoofer or NFC tag again.
z To listen to audio via Bluetooth connectivity without NFC
tag - refer "Pairing with other Bluetooth source de-
vices" on this page.
z It takes about 6-8 seconds for a Bluetooth enabled de-
vice (eg. smartphone) to establish Bluetooth connection
with this unit via NFC or manual connection.
Indicators:
Indica- Condition
tor
Blinks
Lights up
No indication
However, the indication status is not displayed during
standby mode.
„ Pairing with other Bluetooth source devices
1
Press the POWER ON/STANDBY button to turn the power on.
2
Press the INPUT button (sound bar) repeatedly or
button (remote control) to select Bluetooth function. "BLUE-
TOOTH" appears on the display.
3
Sound bar operation: Press PAIRING button.
Remote control operation: Press and hold the PAIRING button
for 3 seconds or more.
"START PAIRING" appears on the display. The unit is now in pair-
ing mode and is ready to be paired with other Bluetooth source
device.
4
Perform pairing procedure on the source device to detect this
unit. "HT-SB602 SHARP" will appear in the detected devices list
(if available) in the source device. (Refer the source device oper-
ating manual for details).
Notes:
z Place the devices to be paired within 1 meter (3 feet) of each
other when pairing.
z Some source devices are unable to display lists of detected
devices. To pair this unit with the source device, refer to the
source device operating manual for details.
5
Select "HT-SB602 SHARP" from the source list. If Passcode* is
required, enter "0000".
* Passcode may be called PIN Code, Passkey, PIN number or
Password.
6
"CONNECTED" appears on the display once the unit is success-
fully paired with the source device. (Pairing information is now
memorised in the unit.) Some audio source devices may connect
with the unit automatically after pairing is completed, otherwise
follow the instructions in the source device operating manual to
start connection.
7
Press the play button on sound bar, remote control or source de-
vice to start Bluetooth streaming playback.
Bluetooth status
In waiting or pairing mode
Connected
Unconnected
(Bluetooth)