Recycling; Guarantee And Support - Philips AVENT SCF355 Bedienungsanleitung

Recycling

Do not throw away the product with the normal household waste at the end of its life, but hand it in
at an official collection point for recycling. By doing this, you help to preserve the environment.
Follow your country's rules for the separate collection of electrical and electronic products. Correct
disposal helps prevent negative consequences for the environment and human health.

Guarantee and support

If you need information or support, please visit www.philips.com/support or read the separate
worldwide guarantee leaflet.
Troubleshooting
This chapter summarizes the most common problems you could encounter with the appliance.
If you are unable to resolve the problem with the information below, contact the Consumer Care
Center in your country.
Problem
The milk is too hot.
The milk is still cold.
The bottle warmer defrosts
milk too slowly.
The bottle warmer stops
working during the warming
process.
I cannot turn on the bottle
warmer.
You may have selected an incorrect setting or have left the bottle in the
bottle warmer longer than the time indicated in the settings table.
Select the setting and check the time required to warm the milk according
to the "Express warming reference table". After the time indicated in
the express warming reference table has passed, take out the bottle
immediately or turn the knob to "Keep Warm" to keep the milk warm,
otherwise the milk will be overheated.
You may have selected an incorrect setting or have used a silicone bottle.
Select the setting and check the time required to warm the milk according
to the "Express warming reference table". After the time indicated in
the express warming reference table has passed, take out the bottle
immediately or turn the knob to "Keep Warm" to keep the milk warm,
otherwise the milk will be overheated.
If you are using a silicone bottle, after the time indicated in the express
warming reference table has passed, wait for 30-60 seconds to ensure the
milk is warm.
The milk should never be defrosted at a high temperature because it will
lead to loss of nutrients. Due to the gentle temperature at which the milk is
being defrosted, it might take longer time than expected to melt the milk.
The bottom of the bottle warmer may be blocked by the limescale.
The bottle warmer should be descaled at least every four weeks.
See section "Descaling".
Solution
ENGLISH
15