Dometic CRX-Serie Montage- Und Bedienungsanleitung Seite 21

CRE
A
NOTICE!
• The device can be tilted sideways up to 30° for only a short period of
time. When setting up the refrigerator, note that it must be fastened
to take account of this. If you have any questions regarding installa-
tion, consult your specialist dealer.
• Install the refrigerator so that the warm air produced can easily
escape (either upwards or to the sides, fig. 5, page 5).
• The device is designed for ambient temperatures between +16 °C
and +38 °C.
7.2 Notes on installing the refrigerator
!
WARNING! Fire hazard!
• When positioning the device, ensure the supply cord is not trapped
or damaged.
• Do not locate multiple portable socket-outlets or portable power
supplies at the rear of the device.
Observe the following when installing the refrigerator:
• Install the refrigerator so that the warm air produced can easily escape
(either upwards or to the sides, fig. 5, page 5).
Key to fig. 5, page 5
No. Explanation
1 Cold intake air
2 Hot waste air
3 Condenser
4 Spacing above the refrigerator if there is not sufficient space for the air to
circulate above or at the side.
• Observe the following installation dimensions:
– CRE0050: 550 x 390 x 544 mm
– CRE0065: 595 x 458 x 535 mm
– CRE0080: 578 x 485 x 650 mm
• Keep objects clear of openings in the housing or installation structure (such as
ventilation slots, etc.).
EN
Installing and connecting the refrigerator
21