Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. Assembly of the device
Burner
Continuous flame button
Stainless steel handle
Stand base from
synthetic material
Gas valve
(remove stand base to access)
5. Application
The gas reservoir of the appliance is empty on delivery. Read
the section "Filling / refilling the gas tank" for this purpose.
Adjustable gas dial
Grip the stainless steel handle with one hand ensuring that
Ignition
the burner is pointed away from the body. Release the safety
button
switch by pressing to the left until you hear it lock into its
operating position. Press and hold pressed the ignition button
Safety switch
(child resistant
to light the flame.
latch)
When the ignition button is released the flow of gas is stopped
and the flame extinguished. The child protection system is
active again once it has sprung to the right on its own.
In case the appliance fails to ignite upon first attempt, repeat
the process from the start.
The gas contained in the reservoir of the flambé burner should
never be completely used up. The appliance should be re-filled
as soon as a reduction in the size of the flame is noticeable.
Do not try to use up all the contents of the gas reservoir.
Each time after use, ensure that the flame is
completely extinguished.
Werbung
