Starting The Machine - FITFIU FITNESS MC-90 Betriebsanleitung

STARTING THE MACHINE

To start the machine, press the START button and the 3 second countdown will begin. The machine will start at the
lowest speed on 1.0Km/h for 60 seconds.
CHANGING THE SPEED
There are 3 ways to increase or decrease the speed.
1. Control panel - by pressing the up and down buttons.
2. Handrail controls - by pressing the buttons on the left handrail.
3. Quick start buttons - by pressing the quick start buttons to increase your speed to 2, 4, 6, 8, 9, 10Km/h.
CHANGING THE TIME IN MANUAL MODE
1. Press the MODE button once - 30 minutes will be displayed in the LED display.
2. Select the time using the speed buttons.
3. Press the START button - the machine will beep and start moving at the lowest speed, 1.0Km/h.
4. Select the speed - refer to changing the speed section.
5. The LED will display the time left.
CHANGING THE DISTANCE IN MANUAL MODE
1. Press the MODE button twice - 1 Km will be displayed in the LED display.
2. Select the distance using the speed buttons.
3. Press the START button - the machine will beep and start moving at the lowest speed, 1.0Km/h.
4. Select the speed - refer to changing the speed section.
5. The LED will display the distance left. Selecting the pre-set programs.
PROGRAM
There are 12 pre-set programs for you to choose and you can change the time and speed. The pre-set programs each
have a pre-set time of 30 minutes that is divided into 20 segments of 1.5 minutes (each representing 5% of the total
time selected).
1. Press the PROG button until the desired program in displayed in the LED panel.
2. Select the time between 5 and 60 minutes by using the speed buttons.
3. Press the START button - the machine will beep and the program will start automatically.
ELECTRIC TREADMILL
45
MC-90
EN