Using The Product - FITFIU FITNESS MC-500 Betriebsanleitung

USING THE PRODUCT

SAFETY TETHER AND EMERGENCY STOP
The product comes equipped with a magnetic emergency stop system. This safety tether must be attached to the
console in order for the equipment to run. It is designed to attach it to your clothing so that if you leave or fall from the
equipment it will stop automatically, helping prevent injury.
Before beginning a workout session, ensure that the safety tether is properly placed onto the console and that the clip
is securely attached to your clothing.
NOTE: If the equipment is on, but the safety tether is not attached, "----"shows on the display and
the equipment cannot be started..
OPERATION
The equipment features a computerised display that provides you with controls for operating the unit as well as
workout information, such as duration, speed, distance travelled, etc. To use the equipment:
1. Plug the equipment into the electrical supply.
2. Place the power switch, located at the front of the unit, in the "ON" ("I") position.
3. Attach the safety tether to the safety tether location on the console.
4. Operate the equipment as desired.
WARNING: Always stand on the side rails when starting the equipment.
Never stand on the belt then start the machine.
CONSOLE AND FUNCTIONS
The display shows current information, such as
current speed, elapsed or remaining time, used
or remaining calories, current pulse etc. The
range of values for each is:
• TIME: 5:00 a 99:59 minutes / seconds.
• DISTANCE: 1,0 a 99,9 kilometres.
• SPEED: de 1 a 18 km/h.
• CALORIES: 20.0 a 999 calories.
• PULSE: 50 a 200 beats/minute (BPM).
• INCLINATION: 1 to 15.
NOTE: When displaying pulse, you must have both hands on the metal sensors on each handle.
ELECTRIC TREADMILL
INCLINE
3
6
9
INCLINE
PROG START
57
MC-500
SPEED
3
6
9
AUX
FAN SPEED
STOP MODE
EN