Jung JKB Serie Betriebsanleitung Seite 42

In the case of the complicated example 2, the jack
may not be just anywhere, since the calculation of the
centre of gravity has shown that it is not in the centre.
Depending on the lifting side, different lifting points for
the jack are obtained. Two diagonals are drawn into
the opposite corners of the desired lifting side through
the centre of gravity. As a result, the opposite side is
the axis of rotation. The other two opposite sides are
prohibited as lifting points within the triangle, since
here the load to be lifted would tilt.
The following examples show the graphic determination
of the lifting side on all four sides of the load to be
lifted.
Left lifting side
Top lifting side
- 42 -
JKB revolving transport trolleys / JLF multi-purpose trolleys
Bottom lifting side
Right lifting side
For an unstable transport load, the centre of gravity
moves in the direction of the axis of rotation (the edge
opposite the jack).
Unstable transport loads include "loo-
sely" connected objects (such as screw
or rivet constructions), as well as loads
containing liquids.
© JUNG Hebe- und Transporttechnik GmbH