Installation Instruction; Air Outlet - Küppersbusch EDL12700.0GE Montage- Und Gebrauchsanweisung

Installation Instruction

This installation instruction contains important information, read it carefully and follow any
instructions. This will prevent failure caused by wrong use and/or installation. Keep this
manual for possible later use. Follow the instructions from the manufacturer of the cooking
equipment for the installation of hoods. Install this hood with at least two people. Replace
defective parts only with original spare parts from the manufacturer.
Safety requirements
Installation, connection, and repairs should be performed by a professional. Only a
professional has the knowledge to determine the installation and the air outlet of the hood.
The attachment of the hood should be appropriate to the weight of the device and the load
of the substrate.
Risk of injury
During manufacturing of the extractor, sharp edges can be formed. Therefore always wear
gloves during installation.
Risk of electric shock
Voltage must match the voltage marked on the type plate. This plate can be found under
the grease filter. This appliance should be connected to an grounded system. The electric
connection must be easily accessible after installation.
Always disconnect from electricity before service or repair!

Air outlet

The air should not be discharged into a chimney which is also used for the removal of
exhaust gases from equipment working on fuel (including gas). Take into account the rules
for air outlet. Prepare electrical connection and ducting, that way the hood can easily be
connected. Avoid sharp bends and kinks in the drain hose.
Mounting above a stove
Furnace for solid fuels
In a solid fuel stove which can fire out (sparks) is the fitting of the hood only allowed when
the furnace is closed and its shielding is not removable.
Always follow the installation requirements and instructions of the cooker manufacturer!
Downloaded from www.Manualslib.com manuals search engine