Küppersbusch EDL12700.0GE Montage- Und Gebrauchsanweisung Seite 13

Stainless steel surfaces
- Use a gentle nonabrasive cleaning detergent for stainless steel.
- Always clean in the grinding direction.
- Don't clean Stainless steel surfaces with an scourer, sand, soda or acid-
or chlorinated detergents!
Bulb replacement
Faulty lamps should be changed. Before switching the bulb disconnect the hood from main power (pull the
plug).
Lamps remain hot for a while, let them cool down before touching them.
- Disconnect main power.
- Remove the metal ring with an small
screwdriver. Attention! Don't drop the glass cover.
- Remove the old bulb.
- Install a new bulb (type G4 (20 W)), hold it with an
cloth. (Don't touch the bulb with your skin!)
- Install the glass cover and metal ring.
Faults
Check the following points before contacting the service department.
Downloaded from www.Manualslib.com manuals search engine