Hama Triton Bedienungsanleitung Seite 4

g
Operating Instruction
Overview:
1. Installation
2. Software Functions
3. Cable Remote Control Functions
4. Specifi cations
5. Safety Instructions
6. Troubleshooting
7. Contact and Support Information
Important:
Read the safety instructions in this manual before using
the product. Keep this manual for later reference.
Package contents
• 5.1 USB headset by TRITON
• Driver CD
• Operating instructions
System requirements
• USB port
• Windows 98SE/ME/2000/XP and VISTA
• Intel Pentium III or above, or AMD K6 500 MHz CPU
• CD-ROM drive
• At least 64 MB RAM (main memory)
• At least 50 MB memory space (hard drive)
1. Installation
Note:
• Attach the headset to your PC fi rst, and switch it on.
Then install the driver software from the enclosed
driver CD.
• Always use the same USB port for the headset. If you
want to use a different port for the headset after
installing the driver software, the device may not be
recognised.
1 Plug the headset directly into the USB port on your PC
and wait for your PC to recognise the new USB device.
2 Switch on the headset using the switch on the cable
remote control.
3 Insert the provided CD-ROM into your CD-ROM drive.
4 If the installation program does not run automatically,
click „Start -> Run -> Search" and select your CD-ROM
drive.
6
Downloaded from www.Manualslib.com
5 Click the „autorun.exe" fi le and follow the instructions
on the screen.
6 When the starting screen appears, run the required
installation.
7 Restart the PC once the driver installation has fi nished.
2. Software Functions
To test the headset and adjust settings, double click the
symbol in the task bar at the bottom-right of the
screen.
2.1Registerkarte „Haupteinstellung"
2.1.1 In the Output Devices window, you can simulate
how many channels are to play sound. Six-channel
output is recommended. Activate the bass boost by
clicking the icon next to the symbol for 6-channel
output.
2.1.2 You can set the volume for each of the 5 speakers
individually using the symbol in the right
section of the window.
manuals search engine
2.2 „Mixer" tab page
2.2.1 This tab page allows you to customise the sound of
the headset.
2.2.1 We recommend that you activate the
„Boost + 20dB" checkbox in both microphone scales
by clicking the hammer symbol . This amplifi es
the sound at the microphone, which can be useful
for programs such as Teamspeak and Ventrilo, for
example.
2.3 „Effects" tab page
2.3.1 Use this tab page to set individual effects.
You can use the 10-band equalizer or one of 16 different
presets (jazz, rock, classical...), for example.
You can also choose from 27 various surround effects
and 3 different room acoustic settings (small, medium
and large).
2.4 „Karaoke & Magic Voice" tab page
2.4.1 You can distort and change the sound of your voice
on this tab page.
2.4.1 You can use the various symbols in the
„Magic Voice" section to give the voice a masculine
or feminine tone, for example. Choose from the
following modes: „Monster, Cartoon, Masculine,
Feminine".
7