Instructions For Installation Of Software; System Requirements; Spare Parts; What To Do In Case Of Breakdown - Intercable Stilo 60 Betriebsanleitung

STILO 60

14. Instructions for installation of software

14.1 System requirements

The PC where the software is installed must fulfi ll the following requirements:
Operating system:
CPU:
RAM:
Hard disc:
Screen resolution:
Miscellaneous:
14.2 Plug & Play
After successful installation of the program the battery powered crimping tool STILO 60
is automatically recognised by the computer and the programs or data can thus be
updated.
A detailed installation instruction can be found on the CD-ROM provided.

15. Spare Parts

Only original Intercable spare parts are allowed to be used.
Battery:
Battery Charger:

16.What to do in case of breakdown

In case of failure the compression tool is shut down automatically and remains blocked.
The service LED illuminates red or orange. Further process is only possible by changing
the battery or respectivly removing it for a short time.
If the failure of the compression tool continues after „reset", contact the Intercable
customer service.
Windows 2000, Windows XP, Windows Vista, Windows 7
Pentium 4; 1.7 GHz minimum
512 MB or more (we advise at least 1GB)
200 MB (we advise 1GB)
1024x768 or greater, 65.535 colours or more
CD ROM Reader, USB 2.0
RA12
LG8
45