Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
STILO 60
11. Work process compression
The crimping process is carried out automatically on pressing the start/stop button (1)
on the handle. The operation can be interrupted
1. during the initial phase by releasing the start/stop button 1
2. at any time by pressing the reverse button 2 fi rmly
Having interrupted the crimping process the connection can be pressed once again if
form and position of the connection part engaged have not been changed.
12. Maintenance instructions
After usage crimping tool must be cleaned and stored in a dry place. The power pack
and battery charger must be protected from humidity and foreign materials. Principally
the equipment does not require maintenance.
After the previously set processes are completed it is necessary to take the crimping
tool to the technical assistance service for inspection to guarantee perfect operation
and increase the lifetime of the machine. The customer is not authorised to perform
maintenance.
1
2
43
Werbung
Kapitel
Inhaltsverzeichnis
