Troubleshooting - oneConcept V-12 Handbuch

TROUBLESHOOTING

Problem
The radio signal
roars.
No radio reception. Device not in RADIO
CD drive is not
running.
CD jumps.
Unwanted noise
when playing the
CD.
Distorted sound at
high volume.
No wake-up alarm.
No BT connection
is established.
Possible cause
Radio station not
correctly set.
Radio antenna not
developed.
mode.
Volume too low
CD mode not active
CD is not properly
seated in the drive.
CD contains
unreadable data.
CD is scratched.
CD is dirty.
Lens is dirty.
External physical
influences.
Volume control set to
maximum setting.
Alarm not active.
Wrong alarm time.
The system memory
is full.
Approach
Readjust the radio station.
Develop radio antenna
Select the RADIO mode.
Increase the volume.
Select the CD mode.
Insert the CD correctly.
Check the contents of the
CD.
Clean the CD or replace it.
Clean the CD.
Clean the lens with a
cleaning CD.
Move the machine.
Reduce the volume.
Activate the alarm.
Make sure that AM/PM is
set correctly.
Press and hold the PLAY /
PAUSE key for 2 seconds to
clear the memory.
EN
33