Cd Player - oneConcept V-12 Handbuch

EN
28
Calling up saved stations
When you are in radio mode, you can access the stored radio stations by
pressing the PRESET key on the remote control repeatedly. When you access
the preset stations for the first time, [P01] blinks on the display.
Note: The clock and the radio stations must be reset if there is a power
interruption or power failure. 00:00] appears and blinks on the display to
remind you that the power has been interrupted and the clock must be
reset. After you have reset the clock, start an automatic station search
again.

CD PLAYER

1. Switch on the machine by pressing the STANDBY key. The display goes on.
2. Press the MODE button to select the CD mode.
3. Open the CD door by pressing the OPEN/CLOSE mark on the CD door.
Insert a CD with the label side facing up and then close the CD door.
4. Playback will start from track 1 once the player has finished reading the
table of contents. The playback icon appears continuously on the display.
5. During playback, press the PLAY / PAUSE button to pause the playback.
The playback icon blinks. Press the PLAY / PAUSE key again to resume
playback.
6. Adjust the desired volume with the VOLUME (+/-) keys.