Sidetone; Configuration Setting - Sena SRL2 Benutzerhandbuch

SRL2

21 SIDETONE

Sidetone is disabled by default. You can enable or disable Sidetone
through the Sena Device Manager or the Sena Smartphone App.
Sidetone is the sound of your own voice as picked up by your Bluetooth
system's microphone and reproduced in your own ear, by your own
speaker. It helps you to naturally speak at the correct level according
to varying helmet noise conditions. If this feature is enabled, you can
hear what you are speaking during an intercom conversation or a
phone call.
46

22 CONFIGURATION SETTING

You can set the configuration of the SRL2 by the voice menu instruction
as below.
1. To enter into voice configuration menu, press the Center Button
for 12 seconds until you hear high-toned double beeps. You will
also hear a voice prompt saying "Configuration menu".
2. Tap the (+) Button or the (-) Button to navigate between the
menus. You will hear voice prompts for each menu item as below.
3. You can enable the feature or execute the command by tapping
the Center Button, or disable the feature by tapping the Center
Button.
4. If any button is not pressed within 10 seconds, the SRL2 will exit
the configuration and go back to stand-by.
5. If you want to exit the configuration immediately, tap the (-) Button
and you will hear a voice prompt, "Exit configuration", and tap
the Center Button.