Cleaning - SUHNER ABRASIVE ABRASIVE LTB 6-350 Originalbetriebsanleitung

4.2 Cleaning

4.2.1 Machine
The compressed air motor must
be cleaned and disinfected regu-
larly with drinking water at ≥ 80 °C
in accordance with DIN 10516:2009-05, Table 3. No
chemical cleaning agents and no chemical disinfectants
may be used. Make sure particularly that meat and other
residue is removed at regular intervals.
Very sharp blade!
4.2.2 Nose and blade
The nose and the blade must be
cleaned and disinfected daily with
drinking water at ≥ 80 °C in ac-
cordance with DIN 10516:2009-05, table 3. Make sure
particularly that meat and other residue is removed regu-
larly. Dismantle the blade according to section 3.2.1.
Pull the pinion out of the head piece. Unscrew the grease
cup from the head piece.
Twist the hand piece to detach it from the grip unit. Clean
the parts thoroughly with a brush and detergent. Rinse
with water and let it dry. Do not use aggressive detergent!
To connect the nose, follow the above instructions in re-
verse order. After connecting, press the grease cup but-
ton two to three times.
25