defects of the affected component. The manufacturer reserves the right to replace or
repair the defective component at his discretion. Any warranty claims arising from the
documentation will be assessed on the basis of the Assembly Instructions and User
Manual valid on the date of sale. The warranty does not apply to any damage caused by
any or a combination of the following:
– Failure to read or non-observance of the Assembly Instructions and User Manual, in
particular the safety instructions, information on intended and improper use, information
on maintenance and servicing, the assembly and disassembly instructions
– Inadequately qualified, unqualified or ill-informed operating personnel
– Use of non-original spare parts and / or accessories
– Use of damaged, defective or incorrect components
– Increasing the ladder's working height through the use of ladders, crates or other
equipment
1.5 Intellectual property rights
The manufacturer owns all of the intellectual property rights relating to the Assembly
including excerpts thereof, is only permitted with the manufacturer's permission.
The manufacturer reserves all rights to patents and utility model registrations.
Any breach of the above will be subject to damages.
1.6 Issue date
The issue date of these Assembly Instructions and User Manual is 01.12.2020.
2. Product information
2.1 Intended use
The platform ladders descried in these Assembly Instructions and User Manual must only
safety precautions have been taken and that the platform ladder has been set up properly
and as described in these Assembly Instructions and User Manual. Do not exceed the
ladder's maximum weight bearing capacity of 150 kg and platform height of 1.90 m.
2.2 Improper use
2.1. Any deviations from these uses are considered improper use in terms of the
German Product Safety Act. The same applies to non-compliance with the standards
and guidelines listed in these Assembly Instructions and User Manual.
27