Maintenance And Cleaning - JANE BABYSIDE Gebrauchs- Und Aufbauanweisung

"BABYSIDE" MINI COT - COBED
IMPORTANT. KEEP FOR FUTURE REFERENCE.
READ CAREFULLY
WARNINGS
-WARNING:
Do not use this product without reading the instructions first.
-WARNING:
Do not use this mini cot once the child can sit up, kneel or stand up unaided.
-WARNING:
Placing additional items in this product may cause suffocation.
-WARNING:
Do not place the product near other products that could cause a danger of suffocation or strangulation, for
example: strings, curtains, cords, etc.
-The assembly parts should be firmly secured and checked to make sure that the fastening screws or connection points have
not come loose, and the baby cannot get caught on them or get parts of his clothes tangled in them such as: dummy cords,
hooks, collars or earrings causing a possible risk of strangulation.
-The co-sleeping mini cot should always be placed on a horizontal floor.
-Do not let children play unsupervised near the co-sleeping mini cot.
-When the child is in the mini cot unsupervised, make sure that the rail is always up, correctly fastened in place and
that the zips are fully closed, and that the wheels are fully locked in place.
-DO NOT
use the co-sleeping mini cot if any of the parts are broken, worn out or missing. Contact JANÉ S.A. to get replace-
ment parts and extra instructions if necessary.
-Make sure that all the fastening devices are fully secure as well as the locking devices.
-Never use the cover without the metal structure.
-WARNING:
Do not use more than once mattress in the mini cot.
-WARNING:
To prevent the risk of fire: be aware of the risk of placing the mini cot near a fire or other sources of heat, such
as electric or gas heaters, etc.
-To prevent the risk of falls and suffocation, never use two or more mattresses to make the child more comfortable.
-DO NOT
use accessories that have not been approved by the manufacturer.
-WARNING:
Only use the mattress that comes with
the mini cot. To prevent the risk of suffocation, do not
add a second mattress.

-MAINTENANCE AND CLEANING

Keep the metal parts clean and dry to prevent them from rusting.
To clean the plastic parts, just use mild detergent and warm water.
-WASHING THE COVER
Wash it by hand and leave it to dry at room temperature.
PARTS
A Set of structure and fabric cover
B Base frame
C Detachable lower bar
D Mattress
E Fastening straps
A1 Removable front bar
A2 Window zips
A3 Baby's window
A4 Height adjustment locking button
DO NOT
replace the parts yourself.
A5 Height adjuster
A6 Base frame locking button
A7 Clasp to secure the fastening straps to the main structure
A8 Wheels
A9 Wheel lock brake
A10 Retractable legs
A11 Leg lock
B1 Supports for detachable bar (A1) in co-sleeping mode
11
OK
6 6
3 3
2 2
1 1
NO