Geberit AquaClean 5000 Montageanleitung Seite 13

EN
6
Cover the window of the user detection with
your hand.
7
The air purification automatically starts
after 4-6 s. Press button (ON / OFF) to start
air purification manually.
AquaClean 5000
The spray nozzle is automatically cleaned
before and after each shower procedure.
8
Press the shower button on the control
panel: The spray arm is extended, the shower
starts.
AquaClean 5000
9
Check the spray intensity by pressing the
buttons.
AquaClean 5000
14
AquaClean 5000plus
AquaClean 5000plus
AquaClean 5000plus
10
Start and stop oscillation by pressing the
button.
AquaClean 5000
AquaClean 5000plus
11
Wait 3 min. Press shower button again and
check whether shower water is at body
temperature.
AquaClean 5000
AquaClean 5000plus
If the storage or transport temperature
exceeds 45 °C, the safety thermostat will be
tripped.
12
If water is cold, reset safety thermostat.
1
ºC
2
997.115.00.0 (01)
B786-003 © 07-2012