Gima LD-202 Handbuch Seite 41

41
Table 4
Recommended separation distances between portable and mobile RF communications
equipment and the device ( For home healthcare environment)
The device is intended for use in an electromagnetic environment in which radiated therefore
disturbances are controlled. The customer or the user of the device can help prevent electro-
magnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the device as recommended below, according
to the maximum output power of the communications equipment.
Rated maximum
output power of
transmitter
W
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separa-
tion distance d in metres (m) can be estimated using the equation applicable to the frequency
of the transmitter, where P is the maximum output power rating of the transmitter in watts (W)
according to the transmitter manufacturer.
NOTE1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range ap-
plies.
NOTE2 These guidelines may not apply in all situations. Electromagnetic propagation is affect-
ed by absorption and reflection from structures, objects and people.
Disposal: The product must not be disposed of along with other domestic
waste. The users must dispose of this equipment by bringing it to a specific
recycling point for electric and electronic equipment.
GIMA WARRANTY TERMS
The Gima 12-month standard B2B warranty applies.
Separation distance according to frequency of transmitter m
80 MHz to 800 MHz
3.5
√P
d=
E
1
0.12
0.38
1.2
3.8
12
ENGLISH
800 MHz to 2.7 GHz
7
√P
d=
E
1
0.23
0.73
2.3
7.3
23