Pumping - Gima LD-202 Handbuch

Pumping

Relax in a comfortable chair (you may wish to use cushions to support your back).
a. Press the assembled pump body against your breast. Make sure that your nipple is
centered. Hold the breastshield onto your breast with your thumb and index finger.
Support your breast with the palm of your hand.
b. Press the button,
as per preset level and the stimulation indicator lights up. If the the breast bump
used before without cut off power supply,the breast bump will express at last set
suction level.
c. Once your milk starts flowing, please press the "Stimulation/Expression" button to
enter into expression mode. You can switch the stimulation mode and expression
mode by press the "Stimulation/Expression" button as per your requirement. If no
action is taken during stimulation mode, after two minutes, the pump will automati-
cally change to the expression mode.
d. Depending on your own personal comfort, you can press the
"+" or "-" button to adjust the suction level. Long press the
button can help you adjust the level quicker.
e. Close the bottle with a lid after pumping. Turn off the breast
pump.
Disassemble and clean the parts that contact breast and
milk.
Please keep the airway clear and unobstructed
during sucking, prevent air path blocked.
Use bottle holder to prevent the bottle from tip-
ping over. Do not fill the bottle too full to or prevent
overfilling and spillage. The unit can turn off the
power itself about 30 minutes no operation.
ENGLISH
the breast pump automatically starts up in stimulation mode
32