Weidmuller Portacal 1000 Bedienungsanleitung Seite 25

• Calibration
Equipment Requirements
You will need:
• An accurate,  + 1/ digit multimeter
• A suitable  V DC power supply
• An accurate current/voltage reference
• Suitable Phillips head screwdriver (for opening the case)
Keyboard operation
During calibration the keys function as follows:
Ó
• accepts that the output is at the required level. Note: always
allow about 10 s for the output to stabilise before accepting a value.
QS61001066_Portacal1000_Buch.ind25 25
Calibration
Jumper
CAL
Run
25.01.2008 14:52:54 Uhr