Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. External Voltage Measurement Mode
In this mode the Portacal 1000 measures external voltages. You can
either display the measurement as a voltage or percentage. To display
percentages you must set up upper and lower values for the measured
range.
Select Fn=3 .
Ó
Press
percentage. Select using
If you selected absolute value mode the calibrator will now be displaying the
measured voltage.
For percentage display the display will show InL=.
Ó
Press
Set this to the voltage you require using the
Ó
Press
Ó
Press
Set this to the voltage you require using the
When you press
light to indicate that the unit is in external voltage measurement mode.
4. External Current measurement Mode
In this mode the Portacal 1000 measures external currents. It is
identical to voltage measurement except you must select Fn=4.
In Current measurement mode the I, INC and DEC LEDs are all lit.
QS61001066_Portacal1000_Buch.ind23 23
, the display will show AbS or PEr for absolute value (volts) or
, the display will show the input span lower voltage.
and the display will show INH=.
, the display will show the input span upper voltage.
Ó
to accept the values the V, INC and DEC LEDs will
Ù
and accept using
Ó
.
Õ
Ù
and the
key.
Õ
Ù
and the
key.
25.01.2008 14:52:52 Uhr
Werbung
Inhaltsverzeichnis
