Sharp UA-HG30E Bedienungsanleitung Seite 18

CARE AND MAINTENANCE
HUMIDIFYING FILTER / TRAY
Odour occurrence may be suppressed when washing Humidifying Filter and Humidifying Tray with
water carefully even if the Filter Indicator Light is not ON.
Remove the Humidifying Filter from the Tray.
1
Pull up
1
Turn the handle down on
the reverse side.
CAUTION
Rinse the Humidifying Tray, the Filter Frame and the Humidifying Filter.
Humidifying Tray
2
CAUTION
Cross-Section
view
3. Insert the tab on the other side
of the fl oat into the hole.
2
Turn down
Remove the Filter Frame.
• Drops of water may drip from the Humidifying Filter and the Filter Frame.
Float
• Do not remove the Floats.
• If the Float comes off from the Humidifying Tray, install it in the order
shown below.
Tab
Float
Filter Frame
Float (Styrofoam)
1. Insert the fl oat under this
tab.
E-14
2 Remove
1 Open
Remove the Humidifying
Filter.
Humidifying Filter
2. Insert the tab of the
fl oat into the hole.