Before Using The Appliance The First Time; Assembly Of The Glass Container - Unold 78685 Bedienungsanleitung

31. The appliance is not designed for continuous use. After an operat-
ing time of approx. 2 minutes, let the appliance cool for a few
minutes before switching it on again.
32. Ensure that the motor has come to a standstill before taking off
moving parts.
CAUTION!
The cross-blade is very sharp! Therefore, be extremely carefully
when cleaning the appliance.
Do not open the housing of the appliance under any
circumstances. There is danger of electric shock.
The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.

BEFORE USING THE APPLIANCE THE FIRST TIME

1. Remove all packaging materials and any transport safeguards. Keep
packaging materials away from children - danger of suffocation!
2. Before using the appliance for the first time, carefully clean all parts of the
appliance (see chapter, „Cleaning and care").
3. Ensure that the control dial is in the AUS/OFF/0 position
4. Uncoil the required power cord length and plug the mains plug into an
electrical outlet.

ASSEMBLY OF THE GLASS CONTAINER

1. Place the sealing ring in the lower edge of the blade unit.
2. Connect the blade unit with the underside of the glass container, by fitting
on the blade and unit it clockwise.
3. Place the glass container on the motor block and turn the glass container
clockwise until it locks in place.
4. Pour the ingredients into the container.
CAUTION:
Do not exceed the maximum fill quantity of 800 ml!
5. Then press the lid onto the glass container.
6. Now screw the measuring cup clockwise into the opening.
24
Copyright UNOLD AG | www.unold.de