Introduction; Important Safety Instructions - Sharp Sound Partner AN-SS1 Bedienungsanleitung

Introduction

Thank you for purchasing this SHARP product. To obtain the best performance from this
product, please read this manual carefully. It will guide you in operating your SHARP product.
AN-SS1 consists of Sound Partner and AN-WD1 (Bluetooth

Important safety instructions

. Radio frequency exposure
1
Sound Partner AN-SS1 is a radio transmitter and receiver. When in operation it communicates
with a Bluetooth equipped devices by receiving and transmitting radio frequency (RF)
®
electromagnetic fi elds (microwaves) in the frequency range 2.4 to 2.48 GHz. This product is
designed to operate in compliance with the RF exposure guidelines and limits set by national
authorities and international health agencies, when using compatible device.
2. Avoiding hearing damage
If volume on the headset is too high, permanent hearing loss may occur. Please set the
volume to a safe level. You may become accustomed to listening at high volume but this
could still damage your hearing. If you experience ringing in your ears or muffl ed speech,
stop listening and have your ears checked by a specialist doctor. The louder the volume,
the greater the risk of hearing damage.
Hearing experts suggest how to protect your hearing.
• Limit the amount of time you use the headset at high volume.
• Avoid the habit of increasing the volume so that you do not hear the loud noises around you.
• Turn the volume down if you cannot hear people speaking around you.
For setting the maximum volume limit of the connected device, refer to the instruction
manual supplied with that device.
Class B equipment (home-use broadcasting communication equipment):
This equipment is intended for home-use (Class B) electromagnetic compatibility
equipment and can be used in all areas.
3. Battery information
- A rechargeable battery will have a long service life if treated properly.
ENGLISH
EN-1
Wireless Transmitter).
®