General Notes - AC Schnitzer 4161 190 3109 Montageanleitung

G en era l No tes !
AC Schnitzer Bonnet Vent - Toyota GR Supra
Important Notes !
These Fitting Instructions must be read in full before beginning installation work. AC Schnitzer bears no liability for
damage caused by incorrect installation !
These Fitting Instructions are intended solely for use by authorised AC Schnitzer dealers. These Fitting Instructions
are in all cases directed at professionals trained in Toyota vehicles who have the corresponding specialist
knowledge.
All diagrams show LHD vehicles, for RHD vehicles proceed accordingly or follow separate Fitting Instructions.
All fitting steps are described and depicted for the left side viewed in the direction of travel.
Fitting
Carry out all work in accordance with applicable safety regulations (e.g. wear safety goggles).
Fitting Time ( 1 unit = 5 Minutes )
The fitting time is around 30 units.
Tools Required
File
Paint brush
Tape measure
Adhesive tape
Air saw or similar
Electric screwdriver
Various drill bits
Marker pen
Various Allen keys
Various wrenches
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
Fitting Instructions No.: 4161 190 3109 / Issue: 29.10.2019 / TSch
22