Werbung
Verfügbare Sprachen
Verfügbare Sprachen
G en era l No tes !
AC Schnitzer Front Spoiler - X5 (G05) -
Important Notes !
These Fitting Instructions must be read in full before beginning installation work. AC Schnitzer bears no liability for
damage caused by incorrect installation !
These Fitting Instructions are intended solely for use by authorised AC Schnitzer dealers. These Fitting
Instructions are in all cases directed at professionals trained in BMW vehicles who have the corresponding
specialist knowledge.
All diagrams show LHD vehicles, for RHD vehicles proceed accordingly or follow separate Fitting Instructions.
As manufacturer, we are obliged to point out that any changes you make to a vehicle licensed for use on public
roads require approval by a test centre and registration in the vehicle documents. As the legal regulations may
vary according to location, please contact the competent authorities for information.
Fitting
Carry out all work in accordance with applicable safety regulations (e.g. wear safety goggles).
.....only in conjunction with M-Technik aerodynamic kit
Components and surfaces to be glued together must first be thoroughly cleaned with cleaner! The
adhesive drying time is 24 hours. The vehicle can be washed in a car wash after approx. 48 hours.
Fitting Time (1 unit = 5 minutes)
The fitting time is around 18 units, which may vary depending on vehicle condition and equipment level.
Painting Time (1 unit = 5 minutes)
The painting time is around 16 units, which may vary depending on component composition.
Tools Required
Masking tape
Cordless drill
Drill bit Ø 3mm
Various screwdrivers
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
Fitting Instructions No.: 5111 501 310 / Issue: 24.10.2019 / TSch / Rev01
18
Werbung
