Herunterladen Inhalt Inhalt Diese Seite drucken

Important Safety Instructions; Disconnect Device; Operation; Specifications - IBIZA LIGHT STROBE50LED Bedienungsanleitung

50w led stroboskop
Vorschau ausblenden Andere Handbücher für STROBE50LED:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions carefully before using the 50W LED STROBE. Keep the manual for future
reference.
DANGER: To reduce the risk of electric shock and fire:
1. Always handle with caution, Always use tilt stand at ground level or mount for hanging
on the ceiling etc.
2. Always unplug this unit from the electrical outlet before cleaning.
3. To avoid injury from falling parts, mount the IBIZA LIGHT 50W LED STROBE securely with
compatible screws only.
4. Keep all the ventilation holes at least 20mm away from all obstacles.
5. Always unplug from outlet first before putting on or taking off parts.
6. Close supervision and guidance is necessary when this 50W LED STROBE IBIZA LIGHT is
used by or near children.
7. Always use 50W LED STROBE IBIZA LIGHT only for its intended use as described in these
instructions. Do not use attachments not recommended by the manufacturer.
8. Never operate 50W LED STROBE IBIZA LIGHT if it has been damaged. This item will not
work properly if it has been damaged or dropped into water.
9. Never operate the 50W LED STROBE IBIZA LIGHT when vents are blocked. Keep
ventilation holes away from all lint, hair, etc.
10. Never drop or insert any object into the openings.
11. This item is for indoor and household use only. Never use for outdoor purposes.
12. Keep the cord away from any heated surface.
13. The unit should only be used in moderate climates
14. Do not attempt to open the enclosure as it contains high voltage live wires.
15. LED flash is not replaceable. No user serviceable parts inside.

DISCONNECT DEVICE

Where the MAINS plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.

OPERATION

Plug the strobe into an appropriate mains outlet that delivers a voltage of 230Vac 50/60Hz.
Set the desired flash speed via the rotating knob on the rear panel.
Unplug the unit from the mains when you don't use it anymore.

SPECIFICATIONS

LED quantity: ................................................ 50x white *Ø10mm LEDs,
LED life: ................................................................................ 100,000hrs
Power supply: ............................................................. AC230V 50/60Hz
Consumption: ................................................................................... 3W
Size:............................................................................... 230x220x90mm
Net Weight: ................................................................................ 0.48Kg
© Copyright LOTRONIC 2013
GB
2

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Strobe80ledStrobe20led

Inhaltsverzeichnis