Technical Data; Before Starting The Equipment; Cleaning And Ordering Spare Parts - EINHELL TC-TW 150 Originalbetriebsanleitung

The equipment is to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user / operator and not
the manufacturer will be liable for any damage or
injuries of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be
voided if the machine is used in commercial,
trade or industrial businesses or for equivalent
purposes.

4. Technical data

Dimensions .............approx. 685 x 875 x 455
mm Net weight: .................................... approx.
Max. load capacity: ...................................150
kg
5. Assembly
Important! To avoid malfunctions, please note
that all the drawers must be COMPLETELY
closed before you pull one out!
•
T he handle (6) supplied with the equipment
is already fitted but can also be mounted on
the other side of the trolley (Fig. 2).
•
F or details of how to mount the wheels (3),
please refer to Figure 3 and turn the tool
trolley on its top.
•
I f problems arise with the drawers, please
refer to the following instructions:
What to do if, a drawer cannot be closed pro
perly:
•
L ock and unlock the lock until you hear a
loud "click".
•
O pen a second drawer and then close both
drawers simultaneously or
•
A ctivate the emergency release (4). This is
done by moving the emergency release on
the underside of the tool trolley. This will
release the lock on the tool trolley (see Figs.
4 - 6).
Anl_TC_TW_150_SPK9.indb 10
GB
53 kg
- 11
-
none of the drawers can be opened, although
the lock is not locked:
- 10 -
•
L ock and unlock the lock until you hear a
loud "click".
•
A ctivate the emergency release (4) (see
Figs.
4 - 6).

6. Before starting the equipment

Unlock the drawers by pushing down the locking
switch (4) located in the bottom drawer. (Fig. 5-
6).
•
The keys (2) for the tool trolley (1) are in two
different places. One is attached to the
packaging of the tool trolley, the other to the
instructions for the tool trolley.
•
P lease keep the keys safe in different
places, but NEVER in the tool trolley.
•
A fter transportation and/or assembly make
sure that all drawer compartments are
completely closed.
•
F or safety reasons the tool trolley is
equipped with pull-out stops for the drawers.
This prevents several drawers being opened
at the same time.

7. Cleaning and ordering spare parts

7.1 Cleaning
Clean the tool trolley with a slightly damp cloth
and if necessary a small amount of conventional
paint cleaner. To avoid damaging the surfaces
do not use solvents or other aggressive or
scouring cleaning products.
7.2 Ordering replacement parts: Please
quote the following data when ordering
•
replacement parts: T ype of machine
•
A rticle number of the machine
•
I dentification number of the machine
•
R eplacement part number of the part
required For our latest prices and
information please go to isc-gmbh.info
21.11.2019 08:55:52